Operating instructions Washing machine To avoid the risk of accidents or damage to the appliance, it is essential to read these instructions before it is installed and used for the first time. en, AU, NZ M.-Nr. 11 016 590...
Removing the protective foil and stickers ............18 Miele@home ......................19 1. Setting the language ..................20 2. Setting up Miele@home ..................20 3. Setting the clock format ..................21 4. Removing the transit bars ................. 21 5. Commissioning TwinDos ................... 22 6.
Screwing out and adjusting the feet.............. 88 Installing under a continuous worktop ............. 89 Washer and dryer stack ................... 89 The Miele water protection system ............... 90 Connection to the water supply ................91 Drainage ........................ 94 Electrical connection .................... 95 Technical data......................
Caring for the environment Disposal of the packing Disposing of your old material appliance The transport and protective packaging Electrical and electronic appliances has been selected from materials which often contain valuable materials. They are environmentally friendly for also contain specific materials, disposal, and can normally be recycled.
It must only be used to wash garments which have been declared suitable for washing by the manufacturer indicated on the garment care label. Any other use is not permitted. Miele cannot be held liable for damage resulting from incorrect or improper use or operation.
Warning and Safety instructions Safety with children Young children must not be allowed to use this appliance. Older children may only use the appliance when its operation has been clearly explained to them and they are able to use it safely, recognising the dangers of misuse.
Faulty components must only be replaced by genuine Miele spare parts. Miele can only guarantee the safety of the appliance when Miele replacement parts are used. The electrical socket must be easily accessible after installation so that the machine can be disconnected from the electricity supply if necessary.
– it is switched off at the wall socket and the plug is withdrawn, or – it is switched off at the mains circuit breaker. The Miele Waterproof system protects from water damage provided the following conditions have been met: – The machine is correctly plumbed in and connected to the electricity supply.
Warning and Safety instructions Correct use Do not install the washing machine in a room where there is a risk of frost. Frozen hoses may burst or split. The reliability of the electronic control unit may be impaired at temperatures below freezing point.
Miele recommends using Miele descaler for washing machines which is available to order online at shop.miele.com (depending on country) or from Miele. Strictly observe the instructions on the packaging.
Miele cannot accept liability. A Miele tumble dryer can be stacked on top of a Miele washing machine using the appropriate stacking kit (available as an optional accessory). Please make sure you order the correct one for the Miele washing machine and Miele tumble dryer.
Operating the washing machine Control panel a sensor Takes you back a level in a menu. b Touch display c Start/Stop sensor Touching the Start/Stop sensor starts the selected programme or cancels a programme that has already been started. The sensor flashes slowly as soon as it is possible for a programme to be started and then lights up constantly after the programme has started.
MobileControl return to the main menu. Values set With MobileControl you can operate your previously are not saved. washing machine remotely with the Miele@mobile App. 11:02 The Remote control setting must be ...
Operating the washing machine Extras menu (multiple selection) Examples on how to operate the appliance Extras 11:02 Option lists Quick Water plus Programme menu (single option list) 11:02 Programmes Extra rinse Cottons Minimum iron ...
Operating the washing machine Setting numerical values Pull-down menu You can set numerical values in some The pull-down menu can be used to menus. display information, e.g. about a wash programme. Clock display Overview 11:02 Temperature Spin speed ...
Before using for the first time Remove the detergent Damage resulting from incorrect cartridges and the drain hose installation and connection. elbow from the drum Installing and connecting the washing machine incorrectly will Two detergent cartridges for automatic cause serious damage to property. detergent dispensing and an elbow See “Installation and connection”.
In order to use it you need: – a Wi-Fi network – the Miele@mobile App – a Miele user account. The user account can be created via the Miele@mobile App. The Miele@mobile App will guide you as you connect your washing machine to your home Wi-Fi network.
6 steps of the initial commissioning process. Skip Continue 1. Setting the language To set up Miele@home now: touch You will be asked to select the language Continue sensor. you require for the display. It is possible Useful tip: To postpone set-up until...
Before using for the first time 3. Setting the clock format 4. Removing the transit bars The time of day display can be in 12 h Damage resulting from failure to or 24 h clock format. remove the transit bars. ...
Confirm the preset value with the OK sensor, or change the value. Settings for compartment UltraPhase 1 The procedure below describes the procedure for Miele UltraPhase 1 and Hardness level I 48 ml Miele UltraPhase 2. The procedure for Hardness level II 60 ml other detergents is similar.
Before using for the first time Remove the foil from the detergent Push the UltraPhase 1 detergent cartridge. cartridge into compartment 1 until it locks into position. The following message will appear in the display: Now enter the settings for UltraPhase 2. ...
Before using for the first time Settings for compartment The dispensing quantity for UltraPhase 2 for (hardness range I) is preset. Dosage for comp. 11:02 Push the UltraPhase 2 detergent cartridge into compartment 2 until it Confirm the preset value with the OK locks into position.
Before using for the first time 6. Starting the calibration programme For optimum water and energy consumption and excellent wash results, it is important to calibrate the washing machine. To do this, the Cottons programme must be run without laundry and without detergent.
– Washing at low temperatures and/or using liquid detergents can cause bacteria and odours to build up in the washing machine. Miele therefore recommends cleaning the washing machine once every month. The washing machine reminds you to...
Washing environmentally and economically 2. Actual consumption EcoFeedback You can view information about the You can view the actual amount of energy and water consumption of your energy and water used by a washing machine with the pull-down programme both during and at the menu.
1. Preparing the laundry Useful tip: Stains (e.g. blood, egg, coffee, tea) can be pre-treated using some handy tricks which can be found in the Miele guide to laundry care. Please contact Miele to obtain a copy of this booklet. ...
2. Selecting a programme Switching on the washing Selecting a programme machine Touch the Programmes sensor. Press the button. 11:02 Programmes The interior drum lighting will come on. Cottons Minimum iron 2:39 1:59 The drum lighting will go out automatically after five minutes.
3. Selecting programme settings 2. Select the detergent Selecting the temperature When using Miele's 2-phase system You can alter the preset temperature you must set the colour of the laundry. of a wash programme. Select Whites for loads of white items, ...
3. Selecting programme settings Selecting Extras Stains You can supplement the wash In order to clean stained laundry more programmes with Extras. effectively, you can choose from a list of various types of stains. The wash Touch the Extras sensor.
4. Loading the washing machine Opening the door Closing the door Reach under the door grip and pull Make sure that no items are caught the door open. between the door and the seal. Check the drum for pets or foreign objects before loading it with laundry.
UltraPhase 1 and UltraPhase 2 clean white and coloured fabrics thoroughly. UltraPhase 1 and UltraPhase 2 single use cartridges are available to order from Miele or via the internet at shop.miele.com (see the end Press the yellow button above the of this booklet for details).
5. Adding detergent Degree of soiling Using other methods to remove stains The level of soiling in laundry is divided into three settings: If you wish to use additional methods of stain removal, you have the following – Light options: No visible soiling or stains –...
5. Adding detergent Adding fabric softener Detergent dispenser drawer Any detergent suitable for automatic front loading washing machines can be used with this appliance. Please observe the instructions for use and dosage on the detergent packaging. Ensure that TwinDos dispensing is deactivated.
5. Adding detergent Tips on dosing Using liquid detergent with a pre- wash Adjust the detergent dosage to the level of soiling of the laundry and the size of Liquid detergent cannot be used for the the load. Reduce the amount of main wash if the pre-wash has been detergent with smaller loads (e.g.
Each capsule contains the correct amount for one wash cycle. Caps are available to order from Miele or from the Miele online shop (see the end of this booklet for contact details). Capsules pose a health risk.
5. Adding detergent The wash programme will dispense the contents of the capsule at the correct time. Water intake to the compartment is solely via the capsule. Do not add any additional fabric softener to the compartment. Remove the empty capsule at the end of the programme.
6. Starting the programme - the end of the programme Pull open the door. Starting a programme Remove the laundry. The programme can be started when the Start/Stop sensor is flashing on and Items left in the drum could discolour off.
Spinning Final spin speed in the Programme programme Cottons 1600 When a programme is selected, the Cottons 1600 optimum spin speed for this wash Minimum iron 1200 programme will appear in the display. Delicates A faster spin speed can be selected for QuickPowerWash 1600 certain wash programmes.
Spinning Omitting the final spin (Rinse Rinse and interim spin hold) There is a spin cycle after the main wash and between the rinses. A If Rinse hold is selected, the laundry reduction in the final spin speed will remains in the water following the final also reduce the interim spin speed.
Programme chart Cottons Cold to 90°C Max. load 9.0 kg Items Cottons, linens or cotton mix fabrics, e.g. table linen, towelling, underwear, T-shirts etc. Notes – The Cottons 60°/40 °C programme has a shorter programme duration, longer temperature holding times and higher energy consumption than the Cottons /...
Programme chart QuickPowerWash 40°C – 60°C Max. load 5.0 kg Items Lightly soiled garments which are also suitable for washing in the Cottons programme. Notes A special saturation process and wash rhythm ensure that the laundry is cleaned particularly quickly and thoroughly. Automatic plus Cold to 40°C Max.
Programme chart Shirts Cold to 60°C Max. load 1.0 kg/2.0 kg Items Shirts and blouses made of cotton and mixed fibre. Notes – Pre-treat collars and cuffs if necessary. – Wash silk shirts and blouses in the Silks programme. – If the preset Pre-ironing option is switched off, the maximum load capacity is increased to 2.0 kg.
Programme chart Outerwear Cold to 40°C Max. load 2.5 kg Items Performance outerwear (e.g. jackets and trousers) made from membrane fabric such as Gore-Tex®, SYMPATEX®, WINDSTOPPER® etc. Notes – Zip up or close jackets before washing. – Do not use fabric softener. –...
Programme chart Down duvets Cold to 60°C Max. load 2.5 kg 1 down duvet 2.20 m x 2.00 m Items Quilts, duvets and pillows with feather or down filling. Notes – Remove air from the items before washing to prevent an excessive build-up of foam. To do this, either push the items into a narrow laundry bag to compress them or tie the items together with a washable strap.
Programme chart Curtains Cold to 40°C Max. load 2.0 kg Items Curtains, including net curtains, specified as machine-washable by the manufacturer. Notes – To remove dust, the Pre-wash Extra is selected automatically. – For curtains which crease easily, reduce the spin speed or deselect the spin.
Cleaning the washing machine will significantly reduce bacteria, mould, and biofilm and prevent the build-up of unpleasant odours. Notes – Optimum results can be achieved by using the Miele IntenseClean machine cleaner. Alternatively, a universal powder detergent can be used.
Garment care label symbols Washing Drying The figure quoted in the symbol is the The number of dots indicates the maximum temperature at which the drying temperature. garment can be washed. The number Normal temperature of bars under the symbol indicates the level of agitation permitted.
Extras You can use the Extras sensors to SingleWash augment the wash programmes. For efficiently washing a very small load (< 1 kg) in a normal wash programme. Quick The wash duration is reduced. The programme duration is reduced. Please note the following advice: Mechanical action and energy usage are increased.
Extras Soak Extra quiet For heavily soiled and stained items This option reduces noise levels during with protein stains. the wash programme. Use this if you want to wash during quiet periods (for A duration of between 30 minutes and instance when children are sleeping). 6 hours can be chosen for the soak The final spin is automatically reduced process in 30-minute increments.
Programme sequence Special features in the = low water level programme sequence = medium water level Anti-crease: = high water level At the end of the programme the drum = intensive rhythm continues to turn at intervals for up to 30 minutes to help prevent creasing.
PowerWash 2.0 not be lower than 600 rpm. PowerWash 2.0, a washing technique – CapDosing (, ) ) has not been developed by Miele, is activated in the selected for the main wash. following programmes with small and medium-sized loads: With some options (e.g. Pre-wash, –...
Changing the programme sequence Cancelling a programme Changing a programme You can cancel a programme at any After the start of a programme it is no time after it has started. longer possible to select a different programme. Touch the Start/Stop sensor. Adding or removing laundry The following will appear in the display: You can add or remove items during the...
Favourite programmes Creating a Favourite Entering a name programme It is best to select short, memorable names. You can save your own customised wash programmes under names of your Touch the letters or characters you choice. want. There are two ways to create a ...
Washing assistant The washing assistant helps you with loads consisting of items with different care instructions. The washing machine will use the list of items to put together a suitable wash programme. Scroll to the second page in the main menu.
Timer The Timer can be used to set the time Deleting the Timer at which a programme starts or finishes. The selected time for the Timer can be The programme start can be delayed by deleted before the programme starts. up to 24 hours.
Timer Setting the timeframe SmartStart If you have activated the SmartGrid The SmartStart function (only function in Settings, SmartStart by functional in selected countries) lets will appear in the display SmartFinish by you define a period of time during instead of Start at Finish at when you...
Detergent The correct detergent Detergent dispensing aids All detergents produced for automatic Use dispensing aids (e.g. balls) if these front loading washing machines are are supplied with the detergent, suitable. Follow the manufacturer's particularly when using liquid detergent. instructions and dosage Refill packs of detergent recommendations on the packaging.
Detergent TwinDos dispensing Adding fabric softener or liquid starch separately One of the automatic dispensing containers must be filled with fabric Prepare the starch in accordance with softener. the manufacturer's instructions on the packaging. Select the programme. Separate rinse Useful tip: When adding fabric ...
Detergent Miele recommended detergents Miele detergents and care products have been specially designed for Miele washing machines. They are available to order via the internet at shop.miele.com (depending on country) or from Miele. Miele Miele Miele Miele Cap Cap ...
Detergent The recommendations apply to the temperature ranges given in the Programme chart. Universal Colour Delicates and Special woollens detergent Cottons – – Minimum iron – – – Delicates – – – QuickPowerWash – –...
Cleaning and care External casing and fascia Cleaning the detergent panel dispenser drawer Washing at low temperatures and the Risk of electric shock! use of liquid detergent can lead to a Mains voltage is present when the build-up of bacteria in the detergent washing machine is switched off.
Cleaning and care Cleaning the siphon and the / compartment channel Liquid starch results in clogging. If clogged, the siphon in the / compartment will not work and the compartment can overflow. Clean the siphon particularly thoroughly after using liquid starch a few times.
“TwinDosCare” cleaning cartridge (only available in selected countries) or an empty TwinDos container. Depending on country, both are available from the Miele online shop. The washing machine has a cleaning programme for the TwinDos system. Running the cleaning programme will clean the hoses inside the washing machine.
Cleaning and care First turn off the tap. Cleaning the water inlet filter Unscrew the inlet hose from the tap. The washing machine has a filter to protect the inlet valve. The filter in the screw connection of the water inlet hose should be cleaned approximately every 6 months, or more often if there are frequent interruptions to the external...
With the help of the following guide, minor faults in the performance of the appliance, some of which may result from incorrect operation, can be remedied without contacting Miele. This will save you time and money because you won't need a service call.
Wait at least 2 minutes before reconnecting the washing machine to the mains electricity supply. Then switch the washing machine on again. Restart the programme. If the fault message appears again, contact Miele. The water protection system has reacted. Waterproof system ...
In order to prevent bacteria and unpleasant odours start the "Clean building up in the machine, run the Clean machine machine" programme using Miele IntenseClean or powder programme. detergent. The water inlet for hot water is blocked or turned off.
Remove the fluff with your finger. Do not use any sharp or pointed tools to do this. Restart the programme after cleaning. If the fault message appears again, contact Miele. The washing machine can still be used but with reduced functionality.
Problem solving guide Messages or faults with the TwinDos system Problem Possible cause and remedy The detergent in the cartridge is running low. There Only a few more are between 4 and 8 wash cycles remaining. washes possible Order a new cartridge. before a new cartridge is needed for compartment .
Touch the sensor before running the next TwinDos dispensed. programme. Automatic dispensing will be activated. No detergent/fabric softener was dispensed although automatic dispensing was activated. Try again. If detergent is still not dispensed, call Miele.
In order to prevent bacteria and unpleasant odours building up in the machine, run the Clean machine programme using the Miele IntenseClean washing machine cleaner or powder detergent. The detergent dispenser drawer was left closed after washing.
Problem solving guide General problems with the washing machine Problem Possible cause and remedy Large amounts of The water pressure is too low. detergent residue Clean the filter in the water inlet. remain in the detergent It may be useful to select the Water plus Extra. dispenser drawer.
They do not remove fruit, coffee and tea result. stains. Use the Miele 2 Phase System. The targeted addition of UltraPhase 2 during the wash process removes stains effectively. Use a general purpose powder detergent containing a bleaching agent.
Wait until the temperature in the drum has been cancelled. decreased and the message has gone out in the display. The following appears The door lock has jammed. in the display: Call Miele. The door lock is jammed. Call Miele.
Problem solving guide Opening the door in the event of a blocked drain outlet and/ or power cut Switch off the washing machine. Slowly unscrew the filters until water runs out. Be careful not to release too much water at once. If the flow of water is too strong, some water can seep into the machine base and activate the water protection float...
Problem solving guide Opening the door Danger of injury due to rotating drum! Reaching into a moving drum is extremely dangerous. Danger of injury! Always make sure that the drum is stationary before reaching in to remove laundry. Clean the filters thoroughly. ...
Optional spare parts and accessories cannot remedy yourself, please contact for this washing machine are available Miele. from Miele. Contact information for Miele can be Warranty found at the end of this booklet. The manufacturer's warranty for this appliance is 2 years.
Installation and connection Front view a Cold and hot water inlet hoses f Door (pressure-proof to 7000 kPa) g Access to filters, pumps and b Electrical connection emergency release c Flexible drain hose (with detachable h Access panel for TwinDos cartridges swivel elbow) i Four height-adjustable feet d Control panel...
Installation and connection Rear view a Drain hose e Cold water inlet hose with Waterproof system b Transport clips for inlet and drain f Hot water inlet hose with Waterproof hoses and mains connection cable system c Electrical connection g Safety caps for transit bars d Protruding lid for holding when h Transport clips for inlet and drain moving the machine...
Installation and connection Installation surface Transporting the washing machine to its installation site A concrete floor is the most suitable installation surface. It is far less prone Danger of injury due to to vibration during the spin cycle than unsecured lid.
Installation and connection Using the spanner supplied, turn the Turn the right-hand transit bar 90°, left-hand transit bar 90°, then then withdraw the transit bar. withdraw the transit bar.
Installation and connection Risk of injury from sharp edges. There is a risk of injury from reaching into holes that are not covered. To avoid the risk of injury, the holes for the transit bars must be covered after the transit bars have been removed! ...
Installation and connection Levelling the machine The washing machine must stand perfectly level on all four feet to ensure safe and proper operation. Incorrect installation may increase electricity and water consumption and may cause the machine to move about. Screwing out and adjusting the feet The four adjustable screw feet are used for levelling the washing machine.
Installation and connection Installing under a continuous Washer and dryer stack worktop A Miele tumble dryer can be stacked with the washing machine. The Risk of electric shock due to appropriate “WTV” stacking kit* to exposed cables. match your tumble dryer is required.
The Miele water protection system – The casing on the inlet hoses contains two solenoid valves , The Miele water protection system which cut off the water intake directly protects all parts of the washing at the tap. These valves provide two- machine and surrounds from water fold protection.
Installation and connection The electronic unit and drainage Connection to the water supply and overflow protection Risk of electric shock! – Drainage protection There are electrical wires in the water Any leaking water is collected in the inlet hose. sump ...
Installation and connection The washing machine must be Maintenance connected to a mains water supply in Only use a Miele Waterproof system accordance with current local and hose should you need a replacement. national safety regulations. Damage caused by dirty water.
Installation and connection Cold water (default setting) This washing machine can be operated with cold mains water and/or The washing machine will be operated hot water. with cold mains water only. The other inlet hose is secured to the Damage caused by incorrect back of the washing machine.
If required, the hose can be extended to a length of up to 5 m. The necessary parts can be purchased from Miele. For a delivery head of more than 1 m (up to a max. of 1.8 m) a replacement drain pump will need to be fitted.
If the connection cable is damaged, it must only be replaced with a specific connection cable of the same type (available from Miele). For safety reasons, such replacement may only be carried out by a qualified technician or Miele.
Technical data Height 850 mm Width 596 mm Depth 636 mm Depth with door open 1.054 mm Height for building under 850 mm Width for building under 600 mm Weight approx. 100 kg Capacity 9 kg dry laundry Voltage See data plate Rated load See data plate Fuse rating...
Consumption data Consumption data for the nominated energy labelling programme according to AS/NZS 2040.1 & AS/NZS 2040.2 Load Consumption data Energy Water Duration in kWh in litres Normal Cold Water Cottons 9.0 kg 0.58 4 h 30 min Notes for test institutes: Detergent must be dispensed via the detergent dispenser drawer.
Consumption data Load Energy Water Duration Residual moisture kWh Litres h:min Cottons 90 °C 2.60 2:29 60 °C 1.45 2:29 60 °C 1.10 2:19 0.74 2:59 0.55 2:59 40 °C 1.03 2:39 40 °C 0.70 2:29 0.35 2:59 20 °C 0.40 2:39 Minimum iron 30 °C 0.34 1:59...
Settings Changing a setting You can use the settings to alter the machine's electronics to suit changing Change the value displayed and requirements. confirm with OK. Settings can be altered at any time. Touch an option to select it. Calling up settings An option which is selected will be ...
In this setting you can check the If wished, you can set a different saved energy and water consumption three-digit code. values and enter the energy cost. If you forget the code, only a Miele Options service technician can unlock the washing machine. –...
Settings Memory Display brightness The washing machine will save the The brightness of the display can be last settings (temperature, spin speed altered. and some of the Extras) selected for a It can be set to one of seven different programme after the programme has settings.
Heavy deleted. The factory default setting is: Normal The following agents can be used: Water plus level – Miele UltraPhase 1 – Miele UltraPhase 2 There are four different water levels which can be selected for the Water – Universal detergent plus Extra.
Settings Maximum rinse level Gentle action The water level in the rinse can be With gentle action activated, drum permanently set to the highest value. agitation is reduced. In this way, lightly soiled items can be washed more This function is important for allergy gently.
(visible if Miele@home is deactivated) – The Wi-Fi connection will be reset to the factory setting. The Wi-Fi function is reactivated. Miele@home is no longer set up. A new Deactivate connection set-up has to be carried out (visible if Miele@home is activated) in order to use the Miele@home setting again.
Miele@home activated. activated. This function can be used for starting Once the Miele@mobile App has been your washing machine automatically installed on your mobile device, you at a time when your energy supplier's can check the status of your washing energy costs are most economical.
RemoteUpdate. connected to a Wi-Fi network and you Otherwise, the RemoteUpdate will be have an account in the Miele@mobile aborted and will not be installed. App. The washing machine must be registered with your account in the App.
Settings Appliance parameters Water intake You can programme the washing machine to hot water operation. Options – Cold water (factory default setting) The washing machine will be operated with cold water only. – Hot water main wash Hot water is used in the main wash. Legal information Open source licences You can view information here.
Temperature reduction Installation requirements At high altitudes water has a lower Low water pressure boiling point. Miele recommends If the water pressure is below 100 kPa activating the Temperature reduction (1 bar), the programme will be setting at altitudes of 2000 m or above cancelled and a fault message will to prevent water from boiling.
– Effective stain removal even at low shop.miele.com (depending on country) temperatures or from Miele (see end of this booklet for contact details). UltraColor Detergent – Liquid detergent for coloured items –...
Optional accessories WoolCare Specialist detergents – Liquid detergent for woollens and Specialist detergents are available as delicates capsules in convenient single dose amounts or in a handy bottle. – Includes a special wheat protein conditioning formula Sportswear – Helps prevent pilling and felting –...
Optional accessories Descaler Additives – Removes heavy limescale deposits Booster – Mild and gentle with natural citric – For removing stains acid – Suitable for white and coloured laundry – Available as capsules in convenient single dose amounts Machine care products IntenseClean –...
Miele Experience Centre South Melbourne: Freemans Bay, Auckland 1011 206-210 Coventry Street South Melbourne, VIC 3205 Miele Experience Centre Auckland: Miele Experience Centre and Office Sydney: 8 College Hill 3 Skyline Place Freemans Bay, Auckland 1011 Frenchs Forest, NSW 2086 Telephone:...