Table of Contents
Advertisement
2
Press the Decision switch.
The AC input status for both sides of a dual power feed system are displayed on the
first line of the state indication LCD.
¡
:
Power is being supplied
×:
Power is not being supplied
–:
No power supply units are installed
5.3.3
Abnormal status (symbol *)
4The abnormal status indication (symbol
4For explanations of the displayed error messages, see
Messages Displayed on the Operator Panel."
1
Press the Cursor switch to move the underline cursor on the state indication
LCD to symbol
2
Press the Decision switch.
• If there is only one error
An error message is displayed on the first line of the state indication LCD.
U41290-J-Z816-3-76
∗
, as shown below:
5.3 Using the Operator Panel
∗
) is only displayed if an error occurs.
Section 7.4, "Error
57
Advertisement
Table of Contents
