Figure 3.4 Power Cable Connection For The Primepower900 Main Unit (Model Name: Pw0Xdryyyx) (Dual Power Feed Configuration) - Fujitsu PRIMEPOWER900 Manual

CHAPTER 3 Main Unit Power-on/off
4For a unit using software-based automatic power control, do not set the MODE
switch on the operator panel to UNLOCK or LOCK. If a main line switch in the
power distribution box is switched off and on while the MODE switch is set to
UNLOCK or LOCK, the unit may be powered on automatically as soon as the
main line switch is switched on. To avoid this, set the MODE switch to
MAINTENANCE.
AC inlet
(Rear of the main unit)
Power distribution box for primary power feed (standard)
(Rear of the main unit)
Power distribution box for secondary power feed (option) (Note)
(Rear of the main unit)
Note: One power distribution box is included as standard equipment with the main
unit (primary power feed, in the figure above). An additional power
distribution box must be purchased separately for secondary power feed.
Figure 3.4 Power cable connection for the PRIMEPOWER900 main unit
(model name: PW0XDRyyyx) (dual power feed configuration)
18
Connected to the power
distribution box for primary power feed.
Connected to the power
distribution box for
secondary power feed.
Customer's
distribution panel
CB
Customer's
distribution panel
CB
U41290-J-Z816-3-76