C.5 Connecting Signal Cables - Fujitsu PRIMEPOWER900 Manual

Appendix C PCI/Disk Box
C.5 Connecting Signal Cables
This section explains how to connect a PCI/disk box to the PRIMEPOWER 900 main
unit using signal cables.
Up to two PCI/disk boxes can be connected to a PRIMEPOWER900.
The necessary signal cables are supplied with each PCI/disk box or
PRIMEPOWER900.
• In Japan
l CH-IF cable (2 m (6.6 ft.)) × 1:Supplied with a PCI/disk box
l LCI cable (2.5 m (8.2 ft.)) × 1: Supplied with a PCI/disk box
• Outside Japan
l CH-IF cable (2 m (6.6 ft.)) × 1:Supplied with a PCI/disk box
l LCI cable (2.5 m (8.2 ft.)) × 1: Supplied with a PRIMEPOWER900
The LCI cable is a branch cable that can connect up to two PCI/disk boxes.
Use these signal cables to connect a PCI/disk box to a PRIMEPOWER900 as shown
in Figure C.6.
114
Figure C.5 LCI cable for PCI/disk box
U41290-J-Z816-3-76