Status Monitoring By The Smc - Fujitsu PRIMEPOWER900 Manual

CHAPTER 7 Approaches to Troubleshooting
7.2

Status Monitoring by the SMC

The SMC provides functions to monitor and collect information about the hardware
environment and operational state.
The "Machine Administration Menu" of the system console software on the SMC
shows hardware settings and error information.
The SMC displays the OS system log messages output by the main unit. The SMC
collects and analyzes various information on the component hardware. Analysis
results and other information can be displayed using the "Machine Administration
Menu".
For more information on the "Machine Administration Menu", see Section 1.6,
"System Console Machine Administration Menu", in the "System Console Software
User's Guide".
The results of initial diagnostics can be displayed by using the "prtdiag(1M)"
command on the OS.
7.3 E-mail Notification to System Administrators
This section describes the settings used by the SMC to issue a message to the system
administrator by e-mail if a malfunction occurs in the main unit.
From the "Machine Administration Menu" of the system console software on the
SMC, set information such as the e-mail address and the name of the system
administrator.
Also, the mail program of the SMC must be set up to match your network
environment.
For details on e-mail notification to system administrators, see Section 6.6, "E-mail
Notification (Administration)" in the "PRIMEPOWER HPC2500/2500/1500/900
Installation Guide" (U41300-J-Z816-x-76/C120-E162EN).
For a list of messages issued and how to respond to the events, see Appendix B,
"Troubleshooting" in the "System Console Software User's Guide".
76 U41290-J-Z816-3-76