Table of Contents
Advertisement
The variable tty-sub-conspath sets the console path using the same priority. The
variable tty-sub-conspath sets as the auxiliary console path the console path that
follows the console path specified by tty-conspath in the same partition.
Priority
1
2
3
4
9
10
11
12
(8) diag-level
max:
Operate power-on diagnosis in the maximum range. At this level, power-on
diagnosis takes extra start-up time; therefore, do not set diag-level to max
during normal operation.
min:
Operate normal power-on diagnosis (default setting).
off:
Do not perform power-on diagnosis. At this level, the system may be down
due to failed components. To prevent loss of data, do not set diag-level to
OFF.
U41290-J-Z816-3-76
Table A.3 Console path setting in XPAR mode
Value
c0s0-0
Serial port #0 on basic I/O board #0
c0s1-0
Serial port #0 on basic I/O board #1
c0s0-1
Serial port #1 on basic I/O board #0
c0s1-1
Serial port #1 on basic I/O board #1
c0s0-2
Serial port #0 on PCI/disk box #0
c0s1-2
Serial port #0 on PCI/disk box #1
c0s0-3
Serial port #1 on PCI/disk box #0
c0s1-3
Serial port #1 on PCI/disk box #1
A.2 Other OBP Environment Variables
Specified serial port
97
Advertisement
Table of Contents
