Table of Contents
Advertisement
The exportation process consists of three phases:
selecting the date of the treatment data to be exported
selecting the treatments
exporting on a USB pen drive.
Regarding the numbering in Figure 55, the displayed elements are:
select year
selected date
treatment file list
file status
navigate the file list
select/deselect all files
export button on a USB pen drive
export checkbox for log files only for of all the treatment data files
exit button.
The date can be selected in the upper part of the screen by selecting year , month and day
. It is not possible to select dates that are later in time in comparison to the date of the current
operation.
As soon as a date is selected (displayed in ), the list on the right side of the screen is
updated and shows the treatment files saved on the selected date.
File name display gives the following information:
file status icon (exported/to be exported)
back up data (yyyymmddhhmmss – year, month, day, hour, minute, second)
name and family name of the patient, corresponding to the patient's data records (see
section 5.3)
treatment number
treated nodule number.
If the file list is too long to be entirely shown on the screen, it can be navigated using the up
and "down"
buttons. The list can be navigated "per pages".
The operator selects the files to be exported by clicking on them. Click an already selected file
to deselect it.
The buttons select (
The files identified as "exported"
Press the "Export log file" checkbox
copied in the USB pen drive together with the selected treatments.
Press the "Export all data" checkbox
archive. This procedure may take a few minutes depending on the number of treatments;
the files are exported in a single compressed file (.zip), divided into folders by treatment date.
To exit the screen press the button
44
select month
) and deselect (
can be selected and exported again.
to start exporting the system log files. These files are
to start exporting all the treatment data stored in the
.
Cliniporator model EPS02 – User manual
select day
) all the items of the list.
Advertisement
Table of Contents
