Table of Contents
Advertisement
Cliniporator model EPS02 – User manual
ECG Synchronisation
5.7
Only in case of ECT treatments, C L I N I P O R A T O R allows to synchronise pulses delivery with
an ECG signal, in the following named "ECG sync".
To be able to use this function, connect a
"R-wave trigger" with the features indicated
in
the
following
section
5.8
to
the
appropriate connector located on the rear
panel.
Figure 38 – ECG connection
On the Electrode Selection screen (Figure 37, ), the button
will be displayed in order to
perform this operation. In the beginning, this button is yellow indicating that the option is
inactive.
By clicking on this button the window in Figure 39 appears with the message 'Checking ECG
signal' together with a 10 seconds reverse count (). Afterwards, the system responds on the
ECG signal quality with two options:
Figure 39 - Reverse count dialogue box for ECG signal check
33
Advertisement
Table of Contents
