Table of Contents
Advertisement
3.0
Safety Information
Safety precautions should be observed during all phases of operation of this instrument. The
instrument has been designed to ensure safe operation however please observe all safety
markings and instructions. Do not operate the instrument in the presence of flammable gases or
fumes or any other combustible environment. VeEX Inc. assumes no liability for the customer's
failure to comply with safety precautions and requirements.
Electrical Connectors
Telephone lines may carry dangerous voltages. Always connect the electrical test ports to known
test interfaces, which carry low-level signals.
RTU-4000/RTU-4100 User Manual, D07-00-132P-RevA01
ESD: Electrostatic Discharge Sensitive Equipment
The chassis could be affected by electrostatic discharge. To minimize
the risk of damage when handling the unit, make sure to follow proper
ESD procedures and dissipate any electrostatic charge from your body
and tools and the use proper grounding gear.
• Perform all work at a workplace that is protected against
electrostatic build-up and discharging.
• Never touch any exposed contacts, printed circuit boards, or
electronic components.
• Always store chassis in ESD protected packaging.
• Wear ESD protection and grounding gear when:
• Installing, Uninstalling, or handling chassis.
• Connecting or disconnecting cables from chassis.
Page 7 of 44
Advertisement
Table of Contents
