Table of Contents
Advertisement
Setting the renew analysis values
To begin using the new values, click Measure on the next test run.
Because the tests are performed in succession, the reference trace is not refreshed immediately,
but when the next test run is performed.
New Thresholds
To set new thresholds, click the Change link from the Test Settings box. The Change test
thresholds box appears. Enter new threshold values in the corresponding fields and click Apply.
Setting new thresholds
RTU-4000/RTU-4100 User Manual, D07-00-132P-RevA01
Page 31 of 44
Advertisement
Table of Contents
