Table of Contents
Advertisement
2.0
Product Introduction
The VeEX RTU-4000 is a rack mountable test chassis. The RTU-4100 is a test module designed
to provide OTDR functionality. The RTU-4000 with installed RTU-4100 (RTU) is a rackmount test
solution that can be used for:
• On-Demand testing
• Continuous monitoring when paired with the OX4000 series optical switch; installed on the
same rack as the RTU.
The RTU can be used in stand-alone mode or as a test probe configured as part of the VeSion
centralized server system
Ethernet port or optional LTE model via the embedded web-based software, Fiberizer Desktop, or
VeSion software application. The RTU can be used to test/monitor Point-to-Point, PON and/or
DWDM networks.
The RTU test capability can be increased by integrating the external OXA-4000 Optical Switch.
The OXA-4000 is connected to the RTU-4000 via DB25 cable which is used to power the switch
and support communication between the RTU and switch.
2.1
Key Features
2.1.1
RTU Fiber Probes (RTU-4100)
• Dark and Active Fiber Monitoring
• Catastrophic Fiber Cable failure
• Preventative/Proactive Fiber Monitoring
2.1.2
Optical Switches (OX4000)
• Single mode fiber support
• Wideband wavelength operation range
• Low reflectance and ORL
• 1625 nm and 1650 nm wavelength support for in-service monitoring applications
RTU-4000/RTU-4100 User Manual, D07-00-132P-RevA01
(15.0 VeSion
Overview). The RTU can be remotely accessed using the
Page 5 of 44
Advertisement
Table of Contents
