Table of Contents
Advertisement
In the Fiberizer Desktop software, click the Measurement tab and then click the small arrow in the
Connect section. The OTDR Interface Setup box appears.
OTDR Interface Setup
Select TCP from the Interface drop-down list box and enter the same IP address and TCP port
that is on the RTU-4100 Web User Interface probe settings. Then, click Reconnect and allow
several seconds for the external application to initialize. After Fiberizer Desktop is initialized, click
OK and proceed with the measurement.
For more information on how to use Fiberizer Desktop, see the Fiberizer Desktop User Manual at
www.veexinc.com.
RTU-4000/RTU-4100 User Manual, D07-00-132P-RevA01
Page 37 of 44
Advertisement
Table of Contents
