Solution; Interface Module Failure; Symptom - H3C MSR3610-X1 Installation Manual

Solution

To resolve the problem:
Verify that the serial console cable is in good condition.
1.
Verify that the port settings are correct.
2.
If the problem persists, contact H3C Support.
3.

Interface module failure

Symptom

An interface module is installed in the device, but the LED for the interface module is not on after the
device is powered on.
Solution
To resolve the problem:
Verify that the interface module has good contact with the backplane of the device.
1.
Verify that the device supports the interface module.
2.
Verify that the interface module is installed in the correct slot.
3.
Verify that a correct interface cable is used.
4.
Verify that the interface cable is connected correctly.
5.
If the problem persists, contact H3C Support.
6.
29