Msr3610-X1-Dc; Msr3610-X1-Dp-Dc; Led Description - H3C MSR3610-X1 Installation Manual

MSR3610-X1-DC

Figure 41 MSR3610-X1-DC LEDs
(1) Power status LED (PWR)
(4) LED for SFP fiber port SFP3
(7) System status LED (SYS)

MSR3610-X1-DP-DC

Figure 42 MSR3610-X1-DP-DC LEDs
(1) Power status LED (PWR1)
(4) LED for SFP fiber port SFP2
(7) LED for SFP fiber port SFP5

LED description

LED
System status LED
(SYS)
(2) LEDs for Gigabit Ethernet ports
GE0 to GE3
(5) LED for SFP fiber port SFP4
(8) Micro SD card LED (MiscroSD)
1
2
(2) Power status LED (PWR2)
(5) LED for SFP fiber port SFP3
(8) System status LED (SYS)
Status
Flashing green (1 Hz)
Flashing green (8 Hz)
Steady green
Flashing yellow (1 Hz)
Flashing yellow (8 Hz)
Steady yellow
Off
Flashing yellow at 8 Hz for 5s
Flashing yellow at 8 Hz for 10s
3
Description
Comware has started with the configuration file and
the device has booted up.
The system software image is being copied and
decompressed.
The SDRAM is performing self-test.
The SDRAM has failed the self-test.
The BootWare extended segment does not exist.
The system software image does not exist.
No power input, or exceptions have occurred.
USB flash disk self-configuration succeeded.
USB flash disk self-configuration failed.
35
(3) LED for SFP fiber port SFP2
(6) LED for SFP fiber port SFP5
8
7 9
4 5 6
(3) LEDs for Gigabit Ethernet ports
GE0 to GE3
(6) LED for SFP fiber port SFP4
(9) Micro SD card LED (MiscroSD)