Connecting The System Interconnect Cable - Thermo Scientific Surveyor RI Plus Hardware Manual

2
Installation
Making the Initial Back Panel Connections

Connecting the System Interconnect Cable

Figure 11. 5-connector version of the system interconnect cable
To
MS Detector
Figure 12. 7-connector version of the system interconnect cable
To
MS Detector
16 Surveyor RI Plus Detector Hardware Manual
The system interconnect cable coordinates the timing of the Surveyor plus modules during an
injection sequence.
There are two versions of the system interconnect cable:
• The older version has five combicon connectors. The detector connector is identified by
the DET tag on its adjacent cable as shown in
• The newer version has seven combicon connectors, with three connectors labeled
DETECTOR as shown in
M/S
To
Autosampler
To
MS Pump
M/S
To
Detector
To
Autosampler
Figure
Figure 12.
F5049-010
A/S
A/S
To
Pump
11.
To
DET
Detector
To
LC Pump
To
Detector
To
Detector
Thermo Scientific
To
Pump