Table of Contents

Advertisement

Introduction
1.5.2

Front Panel

Page 1 - 8
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Figure 1-2: CP6012 Front Panel
Legend:
IPMI LEDs
IPMI (green): Indicate the software status of the IPMI controller
General Purpose LEDs
WD (green): Watchdog Status
TH (green): Overtemperature Status
HS (blue): Hot Swap Control
Front-I: General Purpose/POST code or board-specific
Front-II: General Purpose/POST code or board-specific
Integral Ethernet LEDs
ACT (green): Ethernet Link/Activity
SPEED (green/orange): Ethernet Speed
SPEED ON (orange): 1000 Mbit
SPEED ON (green): 100 Mbit
SPEED OFF: 10 Mbit
Note ...
If the TH LED and the WD LED are flashing dur-
ing boot-up, a failure is indicated before the
BIOS has started.
For further information, contact Kontron's Tech-
nical Support.
CP6012
ID 33274, Rev. 5.0

Advertisement

Table of Contents
loading

Table of Contents