Assembled 1 M X 1 M Optical Table - Beckman Coulter Biomek NXP Preinstallation Manual

Figure 3.1 Assembled 1 m x 1 m Optical Table
1. Optical Platform
2. Table Shelf
3. White Plastic Feet (installed)
2
Set the table(s) at a location with adequate electrical, air, vacuum, and system fluid resources
for the Biomek NX
CHAPTER 2, Preparing the Biomek NXP Instrument for Setup
Device
3
Tilt the shelf at an angle and maneuver it between the legs of a table. Set it down across the
table base.
4
Set the optical platform onto the table and align the edges.
B20063AC
P
instrument and Cytomat devices (see
Specifications).
Preparing Cytomat Devices
Setting Up Optical Tables
CHAPTER 1, Preparing the
and the section titled
3
Site,
Cytomat
3-5