Table of Contents
Advertisement
To move the instrument and accessories to the site:
1
With one person on each side of the Biomek NX
the instrument with one hand and grasp the end of the base casting with the other hand.
CAUTION
When lifting the Biomek NX
not grasp the ends of the light curtain that extend across the front of the
instrument.
2
Lift the instrument straight up using the hand positions provided in the base casting and place
it onto a roll-around cart.
CAUTION
To prevent hands from being pinched, carefully set the back of the instrument
down first and then lower the front.
3
Set the back of the instrument down first and then carefully lower the front of the instrument.
4
Inspect the pallet to ensure no parts, such as leveling feet, have worked loose in shipping or
been left on the pallet.
5
Place the accessories onto a second roll-around cart.
6
Roll both carts to the installation site.
B20063AC
Preparing the Biomek NXP Instrument for Setup
Moving the NX
P
instrument, grasp the handhold at the rear of
P
, grasp it only from positions on the base casting. Do
P
Instrument to the Installation Site
2
2-7
Hide quick links:
Advertisement
Table of Contents
