Hardware Connections - Cypress CY8CKIT-042-BLE User Manual

Example Projects
Figure 4-50. BLE_Dongle_Peripheral_IAS TopDesign
4.4.2

Hardware Connections

No specific hardware connections are required for this project because all connections are
hardwired on the BLE Pioneer Baseboard.
Ensure that the correct module is placed on the BLE Pioneer Baseboard corresponding to the proj-
ect being
PRoC_BLE_Central_IAS works with the PRoC BLE Module. BLE_Dongle_Peripheral_IAS is the
common project for both workspaces and programs the BLE Dongle with Peripheral mode firmware.
The pin
PRoC_BLE_Central_IAS.cydwr in the Workspace Explorer, as shown in
Figure 4-51. Pin Selection for BLE IAS Central Example Project
Similarly, the
BLE_Dongle_Peripheral_IAS.cydwr in the Workspace Explorer as shown in
Figure 4-52. Pin Selection for BLE IAS Peripheral Example Project
72
used. PSoC_4_BLE_Central_IAS
assignment for this
pin assignment
CY8CKIT-042-BLE Bluetooth® Low Energy (BLE) Pioneer Kit Guide, Doc. # 001-93731 Rev. *C
works with
project is in PSoC_4_BLE_Central_IAS.cydwr/
for the BLE Dongle
the PSoC 4 BLE Module.
Figure 4-51.
Peripheral project
Figure 4-52.
is in