Backup Of Settings - MUTOH ValueCut VC2-1800 Maintenance Manual

Backup of Settings

Make the backup of "AAS Offset X/Y" and "Scale Length/Width".
When updating the firmware, all setting except these values will be initialized.
In Offline mode, Press TOOL SELECT key to enter the tool setting menu.
Click the right arrow key twice to display the restore menu.
Press CUT TEST key and ON/OFF LINE key at the same time.
Press ENTER key.
VC2E-MM-00
1 2
x2
Tips for pressing both buttons at the same time：
Press the CUT TEST key first, and then press the
ON/OFF Line key.
37
MAINTENANCE MANUAL