Press "ENTER" key.
Note: Only "AAS Offset X/Y", "Scale Length/Width" can be backed-up.
Note: If you want to Initialize the backup value, please go to
Initialize all settings
Completely initialize all the settings including backed-up "AAS Offset X/Y", "Scale length/Width"
values.
Press "TOOL SELECT" key and enter to tool setting menu.
Press "
" key twice and display the restore menu.
}
VCE-MM-02
Offline For
System Setup
Initialize all settings
Offline For
System Setup
1S
72 F
Select:{}
Restore default ?
Select:{}
x2
34
MAINTENANCE MANUAL
80 O0.250M
Ok:ENTER
Ok:ENTER