Dh (Slt); Overvolt - Lapierre Carbon Series 2019 Manual

SET-UP
SPICY
6.1 - REAR SHOCK ABSORBER SETTINGS
To correctly adjust the Fox and Rock Shox shocks, please consult the user guides provided by the constructor.
For the best performance on your e-bike, here are some adjustment and setting tips:
7.1 - Correctly adjust your riding position.
7.2 Overvolt with suspension models only:
Adjust the sag of the rear shock absorber. (SAG is where the travels sits when the rider is on the bike.)
To make sure the suspension will properly work, the sag and rebound speed must be set up according to
your weight and riding.
The average set up of the SAG should be between 20 and 30 % for the rear shock absorber. You can use
as an indicator the o-ring on the shaft to do so.
Sit on the bike with your equipment (hydration bag, etc.) with your feet on the pedals and in riding position
(having someone hold the bike for you and leaning against the wall with your elbows will help), bounce
slightly and make sure the o-ring is against the air sleeve.
Then get off your bike slowly so as not to compress the suspension.
Measure the distance between the o-ring and the shock absorber; this distance is what we call SAG.
Depending on the kind of ride that you are seeking, you can adjust the air pressure in the rear shock
absorber to vary the sag. If you are looking for reaction and precise steering, you should opt for a sag close
WARNING
to 20 %. On the other hand, if you seek more comfort and stability in descents, 30 % will be more suitable.
The rebound speed should be set up according to your type of riding. If the terrain is steep, it has to bounce
NEVER EXCEED THE MAXIMUM fast, if it is flat, it can be slowed down. However be careful and set it up within reasonable limits.
PRESSURE INDICATED
In order to set up the suspension, the shock absorber has a red lever that must be tightened to slow
ON YOUR REAR SHOCK
down, and vice versa.
ABSORBER.
WHEN IN DOUBT, REFER
These set ups are important. Do not hesitate to ask advice from your dealer.
TO THE MANUFACTURER'S
Make sure you never exceed maximal pressures indicated on the shock absorber.
OWNER'S MANUAL FOR YOUR
REAR SHOCK OR FORK.
7.3 Usage: Consult the user manual provided with your Overvolt.
IF YOU STILL HAVE
QUESTIONS, DON'T
HESITATE TO CONTACT YOUR
7.4 – Overvolt carbon models only:
AUTHORIZED LAPIERRE
It is possible to modify the configuration of your Overvolt carbon between 27.5'' wheels and 27.5''+ wheels
DEALER.
by following the instructions opposite.

6 - DH (SLT)

7 – OVERVOLT
III - SPECIFIC MODELS
SPECIFIC MODELS - 15