Gpib Related Panel Description; Address Setting; Remote / Local - Chroma 19572 User Manual

Ground Bond Tester 19572 User's Manual
6.3

GPIB Related Panel Description

6.3.1 Address Setting

1. Under power on menu, press Function Key
1. MEMORY
2. SYSTEM
3. OPTION
4. CALIBRATION
5. KEY LOCK
SELECT FUNC.
2. Move the highlight to "OPTION" by Function Key
to enter OPTION selection setting as the following shown:
SELECT
1.RS232
2.GPIB
3.PRINTER
3. Move the highlight to "GPIB" by Function Key
to enter GPIB setting menu as the following shown:
1.GPIB ADDR.:
4. Then select GPIB Address by Function Keys
5. The setting is completed, presses Function Key

6.3.2 Remote / Local

1. The signal block Remote is highlighted, it means the tester is on Remote status.
2. On Remote status can use Function Key
6-2
RMT LOCK
RMT LOCK
3
RMT LOCK
LOCAL
as the following shown:
MENU
OFST ERR
, . Press Function Key
UP DOWN
OFST ERR
, . Press Function Key
UP DOWN
OFST ERR
, .
UP DOWN
to exit.
EXIT
to switch the tester to Local status.
UP
DOWN
SELECT
EXIT
UP
DOWN
SELECT
EXIT
SELECT
UP
DOWN
ENTER
EXIT