Operation Method - Chroma 19572 User Manual

Ground Bond Tester 19572 User's Manual
STEP 1 GB
CURR： 3.00A
HIGH：
TIME： 3.0s
PROCESS STEP
2. Enter PROGRAM setting menu, the test procedures increase by using Function Key
[UP], the range is from 1∼99.
3. Press [ENTER] to move the highlight to the other parameter want to set.
4. Can switch Function Key menu by using Function Key [MORE..], as shown below:
STEP 1 GB
CURR： 3.00A
500mΩ
HIGH：
TIME： 3.0s
PROCESS STEP
5. By using Function Key [DOWN] can decrease the test step want to set, the range is 1∼99.
6. By using Function Key [DELETE] and [INSERT] can delete and insert a test step.
7. Press Function Key [MORE..] can return to the previous Function Key menu, and
continue to set the other test parameter.

4.7.2 Operation Method

1. Enter PROGRAM setting menu, move the highlight to the parameter you want to set by
pressing [ENTER].
2. Press Function Key [UP] or [DOWN] to set the parameter.
4-8
LOW :
500mΩ
RMT
LOW : OFF
RMT
OFF
LOCK OFST ERR
LOCK OFST ERR
UP
MORE..
ENTER
EXIT
DELETE
INSERT
DOWN
MORE..