Ground Bond Tester 19572 User's Manual
4.12 Output Signal
This instrument has indicator and beeper for indication signals. The output signals in the
system rear panel are:
UNDER TEST: This terminal will be short circuited when in test state, thus it can be used
to control the external signal. The connection point specification is 30V
AC or 60V DC, the current is less than 0.3A.
PASS: This terminal will be short circuited when the DUT passes the tests, the user
specifies the time of short circuit and it can be used to control the external signal.
The connection point specification is 30V AC or 60V DC, the current is less than
0.3A. The action time is from the DUT is passed until it is stopped.
4-14