Printer Function (Option) - Chroma 19572 User Manual

7. Printer Function (Option)

Preface
The user can connect printer (any brand printer except for HP) to print test parameter setting
value or test result report.
How to print test parameter setting value?
1. Under power-on screen, press Function Key F3
PROGRAM.
2. Press Function Key F3
parameter setting value in the memory.
How to print test result report?
After setting printer print parameter, follows normal test procedures to test. When test is
completed according to the user setting, connect the correct printer to print out test result
report.
Enter printer print parameter setting screen.
1. Under power-on screen, press Function Key
2. Press Function Key
3. Press Function Key F3
How to set printer print parameter?
1. By using Function Keys
2. By using Function Key
3. By using Function Key
Print parameter description:
A. AUTO PRINT - - includes the following two parameters for setting print test result report
1. PASS: OFF - - When setting is ON, the test result is PASS will print out the test
2. FAIL: OFF - - When setting is ON, the test result is FAIL will print out the test result
3. F .FEED: OFF - - When setting is ON, end the print and printing paper will skip to
B. PRINT DATA - - Includes the following five parameters for setting print test result report
that includes data.
1. PART NO.: OFF -- When setting is ON, the test result report will print PART NUMBER.
2. LOT NO.: OFF -- When setting is ON, the test result report will print LOT
3. SERIAL NO.: OFF -- When setting is ON, the test result report will print SERIAL
4. TEST DATA: OFF -- When setting is ON, the test result report will print STEP, MODE
5. RESULT: OFF -- When setting is ON, the test result report will print the test result is
, connect the correct printer then will auto print out the test
SELECT
, then move the cursor to 3. PRINT.
SELECT
, then start to set print parameter.
SELECT
, to set various parameter data.
UP DOWN
to move the cursor.
ENTER
to exit this screen.
EXIT
timing.
result report.
report.
another page.
NUMBER.
NUMBER.
and current/resistance data.
PASS or FAIL.
Printer Function (Option)
then move the cursor to 8. PRINT
MENU
then move the cursor to 3. OPTION.
MENU
7-1