Chroma 19572 User Manual page 46

Ground Bond Tester 19572 User's Manual
[:SOURce]:SAFEty:RESult:ALL:MMETerage?
This command is for querying MEASURE METER reading of all steps.
[:SOURce]:SAFEty:RESult:ALL:MODE?
This command is for querying MODE of all steps, it will return character data GB.
[:SOURce]:SAFEty:RESult:ALL:TIME[:ELAPsed][:TEST]?
This command is for querying test time of all steps.
[:SOURce]:SAFEty:RESult:ALL[:JUDGment]?
This command is for querying all judgment result. Return format: First Step Result,
Second Step Result, ..., Last Step Result. Code meaning as below table:
Test result code table:
Mode
Code
STOP
USER STOP
CAN NOT TEST
TESTING
PASS
HIGH FAIL
LOW FAIL
OUTPUT A/D OVER
METER A/D OVER
[:SOURce]:SAFEty:RESult:COMPleted?
This command is for querying the system if complete execution action or not, return 1 or 0.
[:SOURce]:SAFEty:RESult[:LAST][:JUDGment]?
This command is for querying judgment result code of last STEP.
The judgment result code table:
Result
PASS
USER STOP
CAN NOT TEST
TESTING
STOP
The judgment result fail code table:
GB MODE
Hex Dec
HI 11
LO 12
ADV OVER 16
ADI OVER 17
[:SOURce]:SAFEty:RESult:LAST:MMETerage?
It queries Measure Meter value of the last step.
[:SOURce]:SAFEty:RESult:LAST:OMETerage?
5-8
GB
HEX DEC
70 112
71 113
72 114
73 115
74 116
11 17
12 18
16 22
17 23
Code (hexadecimal) Code (metric system)
74
71
72
73
70
17
18
22
23
116
113
114
115
112