Panel Description; Front Panel Description - Chroma 63200 Series Quick Start Manual

High Power DC Electronic Load 63200 Series Quick Start Guide
3.

Panel Description

3.1

Front Panel Description

The front panel of the load includes a 20 × 2 characters LCD display,
three segment LED, 9 led status indicators, and keypads. The LCD
display will show which function is being performed when you use the
keypads. One of the keys has two functions. Figure 3-2 shows the
front panel of the loads.
To use the front panel keys to control the electronic load, local operation
must be in effect. Immediately after the power is applied, local operation
will be in effect. When local operation is in effect, you can use the
display with keypad on the front panel to control the Load. The display
can be used to view the programmed setting. The input voltage, current,
power or resistance is displayed on the three 7-segment LEDs.
In remote state, the keys on the front panel have no effect. Only remote
controller can program the Load. The 7-segment will show the present
input voltage and current readings. The Load LCD display will show
REMOTE message.
Figure 3-1 Front Panel
When editing the settings, the display will blink to inform
the user which setting is to be edited or has been
selected.
When setting the load level, the resolution of current,
voltage, power, resistance and slew rate will be different
from the entered values. The displayed value will
remain as the one entered. But the output will be the
17