Chroma 19572 User Manual page 13

Revision History
The following lists the additions, deletions and modifications in this manual at each revision.
Date Version
April 2004 1.0
June 2004 1.1
May 2005 1.2
March 2007 1.3
Feb. 2008 1.4
May 2011 1.5
Mar. 2012 1.6
Mar. 2013 1.7
Sep. 2016 1.8
Dec. 2016 1.9
Apr. 2017 2.0
Revised Sections
Complete this manual
Modify "SYSTEM Setup"
"How to Enter Memory Process"
"Store Memory"
"PROGRAM Setting"
"Test Procedures"
Delete "How to Select Memory"
Change the address and phone number of Chroma
Add "Material Contents Declaration"
Delete the description of Disposal in "Storage. Freight.
Maintenance. Disposal"
Add the following:
"CE" Certification.
-
description of SCPI command in the section of "Command
-
Summary" and "Command Description".
Add UL/TUV required descriptions.
Modify "Material Contents Declaration".
Modify
- "CE Declaration".
Figure 4-4 in the section of "Remote Control".
-
- the description of "Time T2" in the section of "Timing
Diagram".
Modify "5. GB VOLTAGE 8.0V" on the display screen to "6.0V" in
the section of "How to Enter PRESET Setting Menu".
Modify "CE Declaration of Conformity".
Modify the following:
−
Rear panel figure in the section of "Rear Panel".
−
Figure 4-1, figure 4-2, figure 4-3 and figure 4-4 in the section of
"Remote Control".
−
the description of table and timing diagram in the section of
"Timing Diagram".
Delete FAIL descriptions in the sections of "Rear Panel" and
"Output Signal".
Modify the following:
- "Material Contents Declaration".
- "CE Declaration of Conformity".
Add "User Manual Customer Feedback".
xi