Unpacking - Craftex CX Series Manual

The CX911 will require minimal assembly.
1.) Remove the contents form the carton and
place all items on a clean clutter free work
surface.
2.) Remove all packing, protective materials, and
protective coatings from machine. Use WD40
to help breakdown the protective coating. Just
spray the WD40 on coated areas and wipe
clean with a cloth. You may need to repeat
this step a couple times to remove all
protective coating.
Do not use gasoline, acetone, or paint thinner
to remove protective coating as they may
damage the painted areas.
NOTE

UNPACKING

3.) Compare all the items from the carton with
Figure A. Make sure all items in the
inventory
throwing away carton and packaging
materials.
If any parts of the machine appear to be
missing DO NOT plug in or operate the
machine. The bench grinder can only be
turned on once all the guards and
accessories have been properly installed.
8
are accounted for
WARNING!!!
before