General Safety Instructions - Craftex CX Series Manual

CX911 SLOW SPEED GRINDER CRAFTEX CX SERIES

General Safety Instructions:

Operating a bench top grinder can be
dangerous if safety precautions and common
sense are not followed. The operator of the
machine should
understand the manual before operation of the
tool. Do not operate this bench top grinder if
you have not read the manual and are
understanding of
machine. DO NOT modify this machine in any
way.
Before Operation of Grinder:
WARNING!!!
In order to avoid any potential serious injury
or property damage, read and follow the
safety and operating instructions laid out in
this manual.
1.) Some debris and dust generated by use of
this bench top grinder may contain chemicals
like:
 Lead from lead-based paint
 From Crystalline silica from bricks,
cement, and other masonry
products.
 Arsenic and chromium from
chemically treated lumber
Your risk of exposure to the above listed
chemicals varies based on the type of work
being performed. Always work in a well
ventilated area and with the proper approved
safety equipment. Use of a dust mask capable
of filtering out microscopic particulates should
be worn during operation of the bench grinder.
be familiar with
the limitations of
2.) Read through
thoroughly and understand how to use this
machine for its intended applications.
3.) Ground all machines. If the machine has
and
a 3 prong plug, it must be used in
conjunction
receptacle. The purpose of the third prong is
to provide grounding for the machine and to
this
prevent accidental electrical shock. DO NOT
under any circumstance remove the third
prong.
4.) Avoid possible
environments. Avoid using any electrical
tools or machines and wet or damp locations.
Do not expose to rain.
5.) DO not use electrical machines or tools in
the presences of flammable gasses or
liquids.
6.) Always keep the work are clutter free and
clean. Work area should be free from debris,
slippery floors, grease, and wax.
7.) Keep children away during operation of
the machine and keep everyone out of your
immediate work area.
8.) Do not use the machine for anything that
is not its intended application for which the
machine was designed.
9.)
Do not wear loose fitting clothing, neck
ties, gloves, or jewelry. These items increase
the risk of serious injury as they may be
caught by the machine during operation and
pull the operator in towards the machines
moving parts. Long hair should also be
covered and kept away from the machine
during operation to avoid getting caught as
well.
3
the owner's
with a 3 prong
hazardous
manual
electrical
working