Specific Safety Instructions - Craftex CX Series Manual

Specific Safety Instructions For Bench Top Grinders
1.) Read the instructions thoroughly and
understand before
machine.
2.) Use eye shields
provided with the grinder.
3.) The Grinding wheels will decrease in
diameter with use. As the diameter changes
make sure to adjust the tool rest to keep and
maintain a distance of 1/16" from the grinding
wheel.
4.) Remove and replace any cracked or
damaged grinding wheels immediately. A
cracked or damaged wheel can cause debris
to be discharged towards the operator at a
high velocity. When replacing the grinding
wheel tighten the spindle nut just enough to
secure the wheel in place. Do not over tighten
the grinding wheel as excessive force can
damage the wheel.
replacement grinding wheels only use properly
sized wheels that are rated for the RPM of
your machine.
5.) Always stand to the side of the bench
grinder when starting the machine. Stand to
the side of the machine until it has reached full
operating speed to avoid any possibility of
being hit by debris from a damaged grinding
wheel.
6.) Do not force your work piece into the
grinding wheel. Approach the grinding wheel
with the work piece slowly so that the wheel
may have an opportunity to warm up reducing
the chances of wheel damage. Do not grind on
the sides of the grinding wheels or use coolant
or cutting liquids directly on the surface of the
grinding wheel.
use or operation
and wheel guards
When choosing
7.) The Grinding wheel should be dressed
of often to keep the wheel surface flat and free of
contaminates like residue or glaze.
8.) Tool rest should be kept securely in place
and used to position your work piece for
grinding.
9.) Do not operate grinder around flammable
materials as the grinder will generate sparks
and debris. Back of the grinder should be
cleaned regularly.
10.) Never bring grinding wheels to a stop by
forcing your work piece into the grinding
wheels. Let the grinder come to a stop by
itself.
11.) Allow for the grinding wheels to reach full
speed before beginning work on your material.
a 12.) Only use a dresser to resurface the face
of the grinding wheels.
13.) Keep all safety guards in place. Do not
use the grinder if any of the guards are
damaged or missing.
14.) Secure the grinder to a workbench or
stand using bolts to avoid tipping or sliding of
the machine during operation.
15.) Make sure all wrenches and adjustment
keys are clear of the machine before turning
machine on for operation.
16.) Regularly clean all dust and debris from
inside and beneath the safety guards while
machine is unplugged.
17.) Never grind small pieces of material
without being properly supported by the tool
rests or held by clamps to avoid personal
injury or property damage.
5