Craftex CX Series Manual page 4

10.) Childproof the
removing all switch keys from machinery,
unplugging all equipment, or by use of
padlocks.
11.) Always remove or unplug machine from
power source before
maintenance or making any adjustments.
12.) Keep all protective guards in place and in
proper working order to avoid potential injury.
13.) Make sure the on/off switch is in the off
position to avoid accidental starting of the
machine when plugging it in to its power
source.
14.) Remove all tools from work area used for
maintenance before turning machine.
15.) Use only recommended
accessories. Use of accessories not meant for
this machine can lead to serious injury or even
property damage. Please check manuals of
accessories to ensure that they can be safely
used with your machine.
16.) Never leave
unattended. Wait until the machine has come
to a full stop after turning the power switch off
before leaving the area.
17.) Do not stand on tool as it could result in
serious injury or property damage.
18.) Do not store items above or around the
tool or where anyone may try and stand on the
machine to reach the items.
19.) Keep your balance. Never over extend
yourself around the machine. Make sure work
area is free from grease, oil, and other slip
hazards.
workshop area
performing
or original
a running machine
by 20.) Maintain your machine. Always keep
machine clean and in proper working order.
Dress the grinding wheels and replace other
abrasive accessories when worn out.
21.) Before machine operation check for any
any damaged parts or accessories. Thoroughly
check all safety guards are operating as they
should and are not damaged. Also check for
the alignment, binding, breaking of moving
parts.
22.) Do not operate machine under the
influence of drug, alcohol, medication, or while
tired.
23.) Make sure to secure all work using
clamps or jigs to secure the work piece. This is
much safer then attempting to secure the work
piece using your hands.
24.) Pay attention
operating machine. A second of distraction or
inattention can result in serious injury or
property damage.
25.) You should always wear a dust mask
when operating machine to avoid inhaling any
hazardous
Machine should be operated in a properly well
ventilated area and in use with dust collection
when available. Long term exposure to dust
may result serious and permanent respiratory
and health conditions such as silicosis,
cancer, and even death. Always use a
NIOSH/OSHA approved respiratory protection.
26.) If machine is used in conjunction with an
extension cord it must be heavy enough to
carry the current the machine will draw during
operation. Using a cord with a wire gauge that
is too small or too long can result in voltage
drop causing loss of power and overheating of
the motor. Use only 3 prong extension cords
that have grounding pin.
4
and stay
dust or airborne
alert while
particulates.