Installation - Honeywell SmartVFD HVAC2 Applications Manual

If DC-voltage is not available and the unit has
been stored much longer than 12 months
deenergized, consult the factory before
connecting power.
Warranty
Only manufacturing defects are covered by the
warranty. The manufacturer assumes no
responsibility for damages caused during or
resulting from transport, receipt of the delivery,
installation, commissioning or use.
The manufacturer shall in no event and under no
circumstances be held responsible for damages
and failures resulting from misuse, wrong
installation, unacceptable ambient temperature,
dust, corrosive substances or operation outside
the rated specifications. Neither can the
manufacturer be held responsible for
consequential damages.
Variable frequency drive devices (VFD) and
accessories: new products for thiry-six (36)
months from date of installation. All VFD warranty
return products must have prior authorization
(Form No. 87-0284) and be returned only to the
VFD Service Center in Chambersburg, PA.

INSTALLATION

Mechanical installation
There are two possible ways to mount SmartVFD
HVAC2 in the wall. For MI1-MI3, either screw or
DIN-rail mounting; For MI4-MI5, screw or flange
mounting.
MI1
=M4
BACK LOC
RESET REM
OK
Fig. 4. Screw mounting, MI1 - MI3
9
MI3
=M5
MI2
=M5
LOC LOC
BACK BACK
RESET REM RESET REM
OK OK
M36500
31-00108—07