System Menu - Honeywell SmartVFD HVAC2 Applications Manual

System menu

SYS menu including fault submenu, field bus
submenu and system parameter submenu, and
the display and operation of the system
parameter submenu is similar to PAR menu or
MON menu.In system parameter submenu, there
are some editable parameter (P) and some
uneditable parameter (V).
The Fault submenu of SYS menu includes active
fault submenu and fault history submenu.
READY RU N STOP
REF
MON
PAR
SYS
FWD R EV I/O K EYPAD
1
Press OK to enter V1.1
READY RU N STOP
REF
MON
PAR
SYS
FWD R EV I/O K EYPAD
3
Press down to browse
other active faults
READY RU N STOP
REF
MON
PAR
SYS
FWD R EV I/O K EYPAD
In active fault situation, FAULT arrow is blinking
and the display is blinking active fault menu item
with fault code. If there are several active faults,
you can check it by entering the active fault
submenu F5.x. F5.1 is always the latest active
fault code. The active faults can be reset by
70
ALARM FAULT READY RU N
REF
MON
PAR
SYS
BUS FWD R EV
2
Press Left/Right button
to browse other groups
ALARM FAULT READY RU N
REF
MON
PAR
SYS
BUS FWD R EV
4
Press OK to select one fault
to browse its time
ALARM FAULT
Browse for fault code(C xx),
5
subcode(Id xx), days(d xx),
hours(H xx), minutes(M xx)
BUS
Fig. 42. Fault menu
STOP ALARM FAULT
I/O K EYPAD BUS
STOP ALARM FAULT
I/O K EYPAD BUS
31-00108—07