STALL CURRENT
The current can be set to 0.0...2xI
stage to occur, the current must have exceeded
this limit. If parameter P1.7 Motor current limit is
changed, this parameter is automatically
calculated to 90% of the current limit. See Figure
"Stall current" on page 164.
NOTE: In order to guarantee desired operation,
.For a stall
Nunit
164
this limit must be set below the current
limit.
I
Par . P3.9.12
Fig. 62. Stall current
Stall area
Par . P3.9.14
31-00108—07
100K34.fh11
f