17 Settings on commissioning
17.1
General settings
The device parameters can be set with the keys. The level of protection determines which parame-
ters can be changed (see section 0). On delivery, the device is in user mode. See section 10.1 on
how to use the parameterisation software.
17.1.1 Display language
The operating language can be set in user mode in the Basic setting / system menu:
System
S-Code
P-Code
D-Lock
Reset
Abort
Lang.
English
...
17.1.2 Date and time
Date, time ander other timing parameters can be set in service mode
Operating mode / time settings / Date/Ti DD.MM.YY hh:mm
Time settings
Date/ti
DD.MM.YY
h:mm
...
17.1.3 Baud rate optical interface
The baud rate of the optical interface can be set in service mode
Operating adjustm. / Interfac
Interfac 2
Mod-No. IR EN60870-5
T-Nr.
IR EN60870-5
Type
IR EN60870-5
Bd
9600 Bps
Access
123
...
®
CALEC
energy master installation and operating instructions
Keys
Parameter
Input field unlocking code for service mode
Input field unlocking code for programming mode
Protection level after approx. 4 min. without operation (default lock)
Select: Deutsch, English, Français, Italiano
OK
Note
Date and time: DD.MM.YY hh:mm,
Enter character by character
Keys
Parameter
Click on
IR interface on CPU module
Set baud rate
OK
Number of calls from the M-Bus master
under:
under
to select interface 2
37