Information And References; Information; Documents - INTEGRA Metering CALEC energy master Installation And Operating Instructions Manual

2 Information and references

2.1

Information

These installation and operating instructions describe the installation and commissioning of a stan-
dard device. The chapters describe the topics and tasks in the sequence in which they are needed
during commissioning.
• Safety instructions
• Information about the device
• Installation
• Electrical connections
• Operation
• Fault clearance
• Technical data
Always comply with the safety instructions.
2.2

Documents

The installation and operating instructions VD 3-135 vary in scope, depending on the version and
items covered by the delivery. The information required for ancillary modules and optional functions is
described in additional document extracts (VD 3-136).
Parameterisation software AMBUS Win II
The parameterisation software AMBUS Win II is available for setting the parameters. It can be
downloaded free of charge (see below).
Downloads
The current documents and AMBUS Win II are available as free downloads at
www.aquametro.com/downloads.
4
®
CALEC energy master installation and operating instructions