Right Of Access, Security Levels - INTEGRA Metering CALEC energy master Installation And Operating Instructions Manual

14.2.1 Key functions
Keys Function in display mode
Move line/image up or down
No function in the main menu
Change channel / input / output
Change billing date / logger period
Keys Short ( < 0.5 s )
Confirm
Back to a previous level,
abort process
14.3

Right of access, security levels

The parameters for the device can be set entirely via the keys or via the interfaces. The security
level (lock level) determines which parameters can be altered. At the time of delivery, the devices
are in user mode.
Symbol Security level
User mode
Service mode
Programming
no lock
mode
The codes can be changed in the Basic setting/System submenu.
In EU-compliant devices, activating programme mode will result in the invalidation of the
calibration! The date and time will be recorded in the calibration log and the device dis-
plays an error.
Warning: If you change a code, make sure that you keep it in a safe place. If the code ist
lost, reprogramming is necessary by a service technician on site or in the factory.
®
CALEC energy master installation and operating instructions
Long ( > 0.5 s )
Activate/deactivate the 3 addi-
tional decimal points in the me-
ter settings
Back to the standard display
Settings
Only operating language
All values that are not relevant for calibration,
e.g. initial parameter settings, date/time, meas-
uring point designation etc.
All parameters can be set, e.g. initial settings,
resetting/synchronising of meter readings etc.
Function in edit mode
Setting of figures and/or characters
Selection from a preset list
Select setting position in the edit window
Change list inside a double-list
Key operation
Accept set value
Accept selected value
Finish edit mode
Abort input / selection
In double list: finish process
Code
S-Code
P-Code
At delivery
1111
3132
31