22 The CALEC
22.1
The supply module 100-240 VAC
22.1.1 Safety instructions
The terminals are protected against accidental contact by lateral partition walls. This also prevents the
mixing up of terminals for mains and low voltage supplies.
Caution: dangerous electric voltage!
Misuse can lead to physical injury!
The input cable must be protected with an external fuse F<10 AT.
22.1.2 Function and connections
The supply module supplies the power for the device. Voltages of 100 ... 240 VAC can be connected.
It is always assembled as the left-side terminal module.
The supply voltage is connected to terminals L and N of the 3-pole plug-in screw-type terminal via a
double-pole separator.
®
CALEC
energy master installation and operating instructions
®
master modules
53