Message Submenu; Alarm / Error Submenu; Logbook Submenu; Calibration Log Menu - INTEGRA Metering CALEC energy master Installation And Operating Instructions Manual

18.3.1 Message submenu

In this submenu, all messages are displayed for approx. 5 seconds.
Messages
Display during normal operation.

18.3.2 Alarm / error submenu

This message is also available as a copy in the main menu (see section18.2)
Alarm / Error
No error
Event : 1/1
Display in normal operation

18.3.3 Logbook submenu

All errors, alarms, calibration-relevant events, device manipulations and system messages are re-
corded in the logbook with a key word and date / time. Up to 100 entries can be made. If this num-
ber is exceeded, the oldest entry will be removed to make space for a new entry.
In case of several entries, these can be selected with the
Example: Error in the hot side temperature
Log book 4
Th error CPU module
On : 05.03.08 11:16
Occurred on 05.03.2008 at 11:16 a.m.

18.3.4 Calibration log menu

The events in the calibration log can be selected with the
Calibration log 9
Invalid calibration
No entry
*: No event, "no entry" is shown
®
CALEC energy master installation and operating instructions
Messages
Limit value Th < 50°C
Example of a user-programmed message.
Alarm / Error 1
Error Tc CPU module
Event 1/2
Display of a message (example) In case of several
error messages, use the
ward and back.
keys.
Log book 2
Th error CPU module
Off : 05.03.08 11:56
Reset on 05.03.2008 at 11:56 a.m.
keys.
Calibration log 9
Invalid calibration
05.03.08 10:05
The calibration became invalid on 05.03.2008
keys to move for-
43