Huawei NetCol8000-A013 User Manual page 75

NetCol8000-A013 In-room Air Cooled Smart Cooling
Product
User Manual (800 mm Width)
Figure 4-6 Home screen
Table 4-3 Icon description
No.
1
2
3
4
5
6
7
Issue 05 (2019-12-20)
Icon Name
Indoor fan
rotational speed
percentage
Compressor
rotational speed
percentage
Electric heater
status
Humidification
status
Dehumidification
status
Lock icon
Monitoring icon
Copyright © Huawei Technologies Co., Ltd.
4 Power-On Commissioning
Description
(Current rotational speed of the indoor
fan/Maximum rotational speed) x 100%
(Current rotational speed of the
compressor/Maximum rotational speed) x 100%
If the electric heater is started, 100% is
displayed. If the electric heater is shut down, 0%
is displayed.
If the humidifier is started, 100% is displayed. If
the humidifier is shut down, 0% is displayed.
If the equipment enters the dehumidification
mode, 100% is displayed. If the equipment exits
from the dehumidification mode, 0% is
displayed.
If the password has not been entered or an
incorrect password has been entered, this icon
exists. After the correct password is entered (the
setting or maintenance menu is displayed), this
icon disappears. If no operations have been
performed during the LCD backlight time
(default: 30 seconds), the main menu screen is
displayed, the display panel is locked again, and
the lock icon appears again. To access the
setting or maintenance menu, you need to
re-enter the correct password.
If the unit is in monitoring mode, this icon
68