Huawei NetCol8000-A013 User Manual page 119

NetCol8000-A013 In-room Air Cooled Smart Cooling
Product
User Manual (800 mm Width)
If the outdoor unit does not take the electricity from indoor unit, turn off the circuit breaker
for the outdoor unit.
Step 2 Remove the top cover and left front panel using a Phillips screwdriver.
Step 3 Use a Phillips screwdriver to remove the two screws that secure the rotate panel of the electric
control box, and rotate the rotate panel.
Figure 5-13 Opening the rotate panel
Step 4 Use diagonal pliers to cut off the cable ties that secure the module board cables, and remove
the cable terminals from the module board.
Take a photo before performing this step so that you know how to bind the cable ties and install the
cable terminals later.
Step 5 Use a Phillips screwdriver to remove the four bolts that secure the module board, and remove
the module board.
Issue 05 (2019-12-20) Copyright © Huawei Technologies Co., Ltd.
5 System Operation and Maintenance
112