Technical Data - Otto Bock 3R60-PRO ST Instructions For Use Manual

Another advantage is the very large knee flexion angle, which goes far beyond the usual range. The
joint does not feature a flexion stop bumper. A flexion angle of more than 175° is technically pos-
sible, and is limited only by the corresponding socket connectors, socket shapes or by the cosmetic
foam cover.
An individually adjustable hydraulic unit located between the axial forks controls swing phase. It
prevents excessive heel rise and dampens extension before initial impact. The hydraulic unit's resis-
tances are independently adjustable.
2.5 Different connection systems
The EBS Knee Joint is available in 4 different versions. They differ from each other solely by the
PRO
type of proximal connection used (see front page):
Order number
3R60-PRO
3R60-PRO=ST
3R60-PRO=KD
3R60-PRO=HD

3 Technical data

Order number
Proximal connection
Distal connection
Knee flexion angle
Weight
System height
Proximal system height
up to alignment reference
point
Distal system height up to
alignment reference point
Max. user weight
Mobility Grade
3R60-PRO, 3R60-PRO=ST, 3R60-PRO=KD, 3R60-PRO=HD
Version
Knee Joint with pyramid connector
Version with threaded connector for long residual limbs
Version with lamination anchor for knee disarticulation amputees
Version with pyramid connector anteriorly angled by 10° for hip disarticu-
lation amputees
Attention!
For the prosthetic fitting of hip disarticulation amputees the
specially adapted 3R60-PRO=HD joint version must be used.
The proximal joint connector facilitates prosthetic alignment
of the anteriorly placed hip joint.
3R60-PRO
Adjustment
pyramid
(movable)
175°
770 g
150 mm
2 mm
3R60-PRO=KD 3R60-PRO=ST
Lamination Threaded
anchor connector
Adjustment pyramid
145°
840 g
169 mm 165 mm
21 mm 17 mm
148 mm
75 kg / 165 lbs
2, 3
3R60-PRO=HD
Adjustment
pyramid,
angled by 10°
125° 175°
750 g 770 g
150 mm
2 mm
Ottobock | 17