The UPS unit has detected improper
Short circuit
output impedance level.
Overload
UPS output overloaded
Permissible temperature has been
Overheating
exceeded.
EPO
EPO INPUT TRIGGERED
51
www.ever.eu
EVER POWERLINE RT PLUS UPS Operating Manual
Technical Support, phone: +48 61 6500 400
Disconnect all receivers from the UPS unit.
Make sure that the short circuit is removed
before switching the device back on.
Disconnect some receivers from the UPS
unit. The alarm is deactivated once that
issue is solved.
Wait until the UPS unit cools down. Ensure
free air circulation around the UPS unit.
Restart the UPS unit. Restart the UPS.
Check the EPO connector condition and set
the trigger to disabled position.
2019-11-25 11:43
Need help?
Do you have a question about the POWERLINE RT PLUS 1000 and is the answer not in the manual?