Huawei TaiShan 200 Series User Manual page 17

TaiShan 200 Server
User Guide (Model 2280)
Table 2-1 Description of ports on the front panel
Port
USB port
VGA port
SN
The serial number (SN) on the label is a string that uniquely identifies a server.
The SN is required when you contact Huawei technical support.
Figure 2-5
Figure 2-5 SN example
Issue 04 (2020-01-16)
1 Drive
3 USB 3.0 port
5 Label plate with
an SN label
Servers with Kunpeng 920 5220 or 3210 processors do not support the configuration
of 24 x 2.5-inch SAS/SATA pass-through drives.
Type
USB 3.0
DB15
shows the SN format.
Copyright © Huawei Technologies Co., Ltd.
2
4
-
Description
The USB ports allow USB devices to be
connected to the server.
NOTE
● Before connecting an external USB device,
check that the USB device functions properly.
A server may operate abnormally if an
abnormal USB device is connected.
● If an external USB device is used, the
maximum length of the extension cable is 1
m.
The VGA port is connected to a terminal,
such as a monitor or physical KVM.
NOTE
The VGA port on the front panel does not have
cable screws. The VGA cable is easy to fall off.
You are advised to use the VGA port on the rear
panel.
2 Components
Filler panel
VGA port
-
10