Huawei TaiShan 200 Series User Manual page 65

TaiShan 200 Server
User Guide (Model 2280)
A network cable with the shielding function is recommended. According to
professional EMC test results, when static is generated, a network cable without
the shielding function can cause the system to suspend or restart.
Step 3 Number the new network cable.
●
●
Step 4 Route the new network cable in the same way (underfloor or overhead) as the
network cable to be replaced.
●
●
●
●
Step 5 Remove the network cable to be replaced.
Step 6 Install the new network cable.
●
●
Figure 5-17 Connecting a network cable
Step 7 Connect the other end of the network cable to the peer network port according to
the network plan.
●
●
Step 8 Check that the new network cable is functioning properly.
Issue 04 (2020-01-16)
The number of the new network cable must be the same as that of the old
one.
Use the same type of labels for network cables. Record the name and number
of the local device on one side of a label and those of the peer device on the
other side. Attach a label 2 cm (0.79 in.) away from the end of a network
cable.
Underfloor cabling is recommended because it is tidy and easy to route. Route
cables in the cabinet based on the installation requirements. You are advised
to arrange new cables in the same way as existing cables. Ensure that cables
are routed neatly and undamaged.
Separate network cables from power cables when routing.
The minimum bend radius of a network cable is 4 cm (1.57 in.). Check that
the cable insulation layer is intact. Ensure that cables are routed for easy
maintenance and capacity expansion.
Bind cables with ties when routing. Ensure that optical cables are routed
straightly and bound neatly and that cable ties are installed at even spacing
and fastened properly.
Connect the new network cable to the same port as the removed one.
Install the network cable in the network port securely.
Connect the new network cable to the same port as the removed one.
Install the network cable in the network port securely.
Copyright © Huawei Technologies Co., Ltd.
5 Install and Configure
58