Querying The Processor Model Of A Server - Huawei TaiShan 200 Series User Manual

TaiShan 200 Server
User Guide (Model 2280)
The parameters are described as follows:
●
●
●
●
Step 5 Click Open.
The PuTTY window is displayed.
Step 6 Enter the user name and password.
If the login is successful, the server host name is displayed on the left of the
prompt.
----End

8.5 Querying the Processor Model of a Server

You can query the processor model of a server using the following methods:
●
●
●
Querying the Processor Model on the BIOS
Step 1 Log in to the Remote Virtual Console. For details, see
Remote Virtual
Step 2 On Remote Virtual Console, click
Step 3 Select Forced System Reset.
The system displays "Are you sure you want to perform this operation?"
Step 4 Click Yes.
The server is restarted.
Issue 04 (2020-01-16)
Host Name (or IP address): Enter the IP address of the server to be accessed,
for example, 191.100.34.32.
Port: Retain the default value 22.
Connection type: Retain the default value SSH.
Close window on exit: Retain the default value Only on clean exit.
Configure Host Name (or IP address) and Saved Sessions, and click Save. You can double-
click the saved record under Saved Sessions to log in to the server the next time.
If this is your first login to the server, the PuTTY Security Alert dialog box is displayed.
Click Yes to proceed.
If an incorrect user name or password is entered, you must set up a new PuTTY session.
Open the chassis cover and remove the CPU heat sink. Check and record the
processor model on the mainboard processor silkscreen. For details about how
to open the chassis cover and remove the CPU heat sink, see the
Server Maintenance and Service Guide (Model
Query the processor model on the BIOS
Query the processor model on the iBMC
Console.
Copyright © Huawei Technologies Co., Ltd.
2280).
8.1 Logging In to the
or on the menu bar.
8 Common Operations
TaiShan 200
113