Huawei TaiShan 200 Series User Manual page 97

TaiShan 200 Server
User Guide (Model 2280)
Figure 5-50 Security
Step 2 Select SET Supervisor Password and press Enter, and set the administrator
password. Before setting the password, you must enter the current administrator
password.
Step 3 (Optional) After a password is set, select Clear Supervisor Password to delete the
password.
Step 4 Press F10.
The Save Configuration&Exit dialog box is displayed.
Step 5 Select Yes and press Enter.
----End
Selecting a Language
Step 1 On the Main screen, choose Select Language, as shown in
Issue 04 (2020-01-16)
● The administrator password must meet the following requirements:
– Contains 8 to 16 characters.
– Contains special characters (including spaces) and at least two types of the
following characters: uppercase letters, lowercase letters, and digits.
– Cannot be the same as any of the previous five passwords.
● The default password is Admin@9000.
Copyright © Huawei Technologies Co., Ltd.
5 Install and Configure
Figure 5-51.
90