Huawei TaiShan 200 Series User Manual page 22

TaiShan 200 Server
User Guide (Model 2280)
Table 2-4 Ports on the rear panel
Port
VGA port
USB port
Management
network port
Serial port
GE electrical
port
25GE optical
port
Issue 04 (2020-01-16)
Type
DB15
USB 3.0
RJ45
RJ45
RJ45
SFP28
Copyright © Huawei Technologies Co., Ltd.
Quanti Description
ty
1 The VGA port is connected to a
terminal, such as a monitor or
physical KVM.
2 The USB ports allow USB devices to
be connected to the server.
NOTE
Before connecting an external USB device,
check that the USB device functions
properly. A server may operate abnormally
if an abnormal USB device is connected.
1 This 1000 Mbps Ethernet port is used
for server management, and supports
10/100/1000 Mbps auto-negotiation.
1 The serial port is used as the system
serial port by default. You can set it as
the iBMC serial port by using the
iBMC command. This port is used for
debugging.
NOTE
For details about how to set the system
serial port as the iBMC serial, see Logging
In over the Serial Port in
to the iBMC
4/8 ● Each FlexIO card provides four GE
electrical ports. A maximum of
eight GE electrical ports can be
provided through the two FlexIO
cards.
● This 1000 Mbps Ethernet port is
used for FlexIO card, and supports
10/100/1000 Mbps auto-
negotiation.
4 A FlexIO card can provide a maximum
of four 25GE optical ports.
NOTE
The 25GE optical ports support rate
adaptation to 10GE, and optical modules
of different rates are required.
2 Components
8.2 Logging In
CLI.
15